There's a huge difference between the ALSA MIDI implementation and most other operating systems. With ALSA it is no problem to interconnect different applications on the same computer.
Make sure that ALSA found your soundcard
There is a difference between hardware MIDI ports and software MIDI ports (virtual ports), but in practice every well-written ALSA app should work with both.
gives you a listing of the available hardware MIDI ports on your system. Here's the output on my machine:
tapas@mango:~$ amidi -l Device Name hw:0,0 CS46XX hw:1,0 Virtual Raw MIDI (16 subdevices) hw:1,1 Virtual Raw MIDI (16 subdevices) hw:1,2 Virtual Raw MIDI (16 subdevices) hw:1,3 Virtual Raw MIDI (16 subdevices)
This output shows that I effectively have two soundcards. One of them is
virmidi module that provides 4 "virtual" hardware ports. These can
be used to connect apps that insist on using hardware MIDI ports.
aconnect, which is also used to connect software MIDI
ports, can give you a listing of all MIDI ports (both software and
hardware MIDI ports):
tapas@mango:~$ aconnect -i -o client 0: 'System' [type=kernel] 0 'Timer ' 1 'Announce ' client 62: 'Midi Through' [type=kernel] 0 'Midi Through Port-0' client 64: 'Rawmidi 0 - CS46XX' [type=kernel] 0 'CS46XX ' client 72: 'Virtual Raw MIDI 1-0' [type=kernel] 0 'VirMIDI 1-0 ' client 73: 'Virtual Raw MIDI 1-1' [type=kernel] 0 'VirMIDI 1-1 ' client 74: 'Virtual Raw MIDI 1-2' [type=kernel] 0 'VirMIDI 1-2 ' client 75: 'Virtual Raw MIDI 1-3' [type=kernel] 0 'VirMIDI 1-3 ' client 129: 'FLUID Synth (11157)' [type=user] 0 'Synth input port (11157)' client 130: 'Virtual Keyboard' [type=user] 0 'Virtual Keyboard'
"-o" options tell
aconnect to list both writable and
readable ports (input and output). See the output of the command
"man aconnect" to get more info.
As we can see from above listing from
aconnect, I have two programs
running that provide software MIDI ports. This part of the listing is
shown again below:
client 129: 'FLUID Synth (11157)' [type=user] 0 'Synth input port (11157)'
client 130: 'Virtual Keyboard' [type=user] 0 'Virtual Keyboard'
tapas@mango:~$ aconnect 130:0 129:0
After this I can just play around with the keys on the
fluidsynth plays the appropriate notes.
Of course, I can also connect
vkeybd to a hardware MIDI port:
tapas@mango:~$ aconnect 130:0 64:0
Now, every key press goes to
fluidsynth [we haven't disconnected it
yet] AND to the hardware MIDI output port on my soundcard. That's one of
the nice things about ALSA: you can connect a MIDI source to any number
of MIDI destinations. And you can connect any number of MIDI sources to
a MIDI destination. Very nifty.
aconnect can be tedious. That's why I usually use a graphical
patchbay to connect MIDI stuff. See
Retrieved from "http://alsa.opensrc.org/AlsaMidiOverview"