(Redirected from Troubleshooting)
This troubleshooting is for ALSA problems. Many other software layers
can be involved in Linux audio. Enter the aplay command in a terminal
-vv (extra-verbose) options to play a .wav file through ALSA.
Your computer may have sample files in /usr/share/sound.
aplay -vv /path/to/file.wav
If that produces sound then your sound problems may lie in another package or software layer.
If aplay doesn't produce sound, then use
aplay -L to list all
soundcards and digital audio devices. If this lists other devices, you
can try playing sound through each in turn using its full name using
aplay's -D option (for example
aplay -vv -D front:CARD=Audigy2,DEV=0 /path/to/file.wav).
Another useful command-line utility in the alsa-utils package is speaker-test. The command
speaker-test -c 2 -t wav
will play sound through each of two channels (normally front left and front right) in turn.
An important first step: compile the relevant information using aadebug. Also have a look at FAQ, ALSA modules and Sound cards for troubleshooting your specific module or soundcard. AlsaTips might have useful stuff too. ALSA TroubleShooting PDF by Takashi is an offsite troubleshooting presentation given by one of the core alsa developers.
There are 2 common user-based mailing-lists:
and 2 important developer mailing lists:
Make sure you have installed ALSA as modules, and not compiled into the
kernel. ALSA fails for all sorts of reasons when compiled into the
kernel (this may no longer be true for kernels after v2.6.5*). Anything
that mentions sound in the kernel config, even if it is not directly to
do with ALSA, set its option to M if you can. If you compile your own
kernel: when you configure the kernel, make sure you see
module) and not
* (compiled into the kernel).
/proc/asound/version and that this says something like:
Advanced Linux Sound Architecture Driver Version 1.0.4.
and that the version is 1.0.4 or above. If it is not, download and compile newer drivers for kernel v2.4, or update your v2.6 kernel to version v2.6.5 or later. Check the Quick Install instructions or the other installation instructions on the main page of this Wiki for additional information.
How to check your ALSA library version is distribution dependent.
Usually, you can use the package (e.g. RPM or DPKG) or dependency
manager (e.g. APT,
up2date, YAST2) used
by your distribution to check the versions of installed packages. You
can also try something like;
grep VERSION_STR /usr/include/alsa/version.h
and check that the version is at least 1.0.4, and usually it is best if it matches the driver version. Check the Quick Install instructions or the other installation instructions on the main page of this Wiki for additional information.
First check that the ALSA drivers are installed and have recognized your
card. Make sure that
/proc/asound/cards lists your card, as card
number zero. If not, make sure that the appropriate driver module is
loaded. To figure out which modules you need, use the
lspci | egrep -i audio command. This usually will list the name and
type of your sound chipset. The main ALSA website then contains a list
of those chipsets and the required
As a wild guess, for most recent low-cost AC97 based motherboards and
laptops, try the
snd-intel8x0 driver. To make sure your card is
recognized and the right driver is selected you can also try the
alsaconf command, and use it to configure your sound card. It can also
be that the ALSA driver has not been loaded but an OSS driver has been
loaded. Check the contents of
/proc/asound/oss/sndstat) and if you see your card listed there, and
there is no
ALSA emulation line, it is being driven by an OSS driver.
Unload it and load the ALSA driver.
alsamixer as root. If you get
alsamixer: function snd_ctl_open failed for default: No such device
the right device special files in
/dev/ might be missing. Run
ls /dev/snd/ and make sure there are several entries there. If the
directory does not exist, or it is empty, use the ALSA
script or similar to create it and the device special files in it.
Also verify that the global config file
present and readable. It may be a link to
rootusers can access the sound device special files
alsamixer both as
root and as a non-
root ordinary user. If the
latter fails, the permissions on the device special files don't allow
access by ordinary users. There are several options to fix this,
depending on security requirements, your distribution and how your PC is
chmod -R a+rwX /dev/snd/.. This might be slightly insecure.
If your card's driver is installed and its name appears in
/proc/asound/cards, and you still hear no sound, the most likely cause
is that you haven't unmuted the right mixer channels and set their
volume to nonzero. Note that ALSA sort of misnames the channels of the
mixers of many cards. Use
alsamixer to play around with the settings
of the most obvious sounding channels. ALSA
modules and Sound
cards may describe what the channels for a
specific sound card. Usually, make sure that the at least the
Headphone if present) channels are unmuted
and have non zero volume. For laptop users, try toggling the
External Amplifier switch.
Many cards can do both analog and digital (labeled SPDIF/IEC958) output,
but some cannot do both at the same time. If you hear no sound, it may
be because the card is in analog mode and you have digital speakers or
viceversa. To determine which mixer channels controls the switch between
analog and digital for your card look at the ALSA
modules and Sound
cards pages for your module/card. Often
this is called
Analog/Digital Output Jack. If present, mute/unmute it
to switch between digital and analog sound output.
If you still hear no sound, your application may be set up to use OSS. Check with your application's preferences to see if this is the case. Also check whether other applications are blocking ALSA, by running (whilst ideally playing sound in them):
fuser -v /dev/snd/* /dev/dsp*
The best fix is to set your application up to use ALSA instead of OSS. If your application does not support ALSA, there are three possible solutions:
It is also possible that your application is set up to use the API used
in the ALSA 0.5.x driver series. In that case switch the application to
use the new API, which is often called the ALSA 0.9.x API or the ALSA
1.x API. You can also set the default for applications that use
mpg123 by putting the line
/etc/libao.conf and for applications that use
OpenAL the line
(define devices '(alsa))
in the file
OssEmulation provides details on OSS
Mastervolume is higher than 66%, for some others the threshold is 50%. Reduce all volume setting. If the distortion goes away, experiment until you determine which are the highest volume settings that don't trigger distortion.
makewith alsa-lib with kernel 2.6.7
If during compilation you get
asm-generic/error.h File not found
errors, and then
cards.lo Error 1, go to your kernel source tree and
copy the files in
/usr/include/asm-generic/ and it should work. This is usually however
a very bad thing to do, and you should try instead to fix your library
As root, type "lsmod". Look at the "Used by" column. If it has all "-", this is bad. It should look more like the second output. This is not an ALSA problem. Unluckily, I don't know how to fix this problem yet. (try modprobe \<modulename> on newer kernels to load the module and modprobe -r \<modulename> to unload it. kill any sound servers (e.g. artsd) before attempting to unload)
Module Size Used by nvram 9036 - snd_mixer_oss 19524 - ipt_LOG 6340 - ipt_state 1956 - ip_conntrack 35328 - iptable_filter 2692 - ip_tables 16672 - lp 10724 - parport 40776 - apm 18032 - uhci_hcd 32692 - usbcore 81504 - snd 54180 - soundcore 9440 - snd_page_alloc 11596 - intel_agp 19712 - agpgart 33640 - evdev 9216 - prism54 57212 - firmware_class 9572 - yenta_socket 21316 - eepro100 30032 - mii 4900 -
Module Size Used by snd_pcm_oss 54184 0 snd_mixer_oss 20864 1 snd_pcm_oss snd_audigyls 28456 0 snd_emu10k1 105352 0 snd_rawmidi 26532 1 snd_emu10k1 snd_pcm 97796 3 snd_pcm_oss,snd_audigyls,snd_emu10k1 snd_timer 28932 1 snd_pcm snd_seq_device 8584 2 snd_emu10k1,snd_rawmidi snd_ac97_codec 71632 2 snd_audigyls,snd_emu10k1 snd_page_alloc 9992 3 snd_audigyls,snd_emu10k1,snd_pcm snd_util_mem 4480 1 snd_emu10k1 snd_hwdep 10628 1 snd_emu10k1 snd 56420 11 snd_pcm_oss,snd_mixer_oss,snd_audigyls,snd_emu10k1,snd_rawmidi,snd_pcm,snd_timer,snd_seq_device,snd_ac97_codec,snd_util_mem,snd_hwdep soundcore 8288 1 snd nvidia 4818804 12 md5 4096 1 ipv6 262180 12 ide_cd 36896 0 cdrom 35228 1 ide_cd lp 8936 0 parport 36936 1 lp usbhid 23680 0 uhci_hcd 30224 0 usbcore 107876 4 usbhid,uhci_hcd e1000 79108 0
One possible fix: Check to make sure that the kernel that is currently running is the one against which the modules were compiled. You may have compiled a new kernel and not installed it, or made a mistake in your bootloader configuration.
If you run Gentoo or any other source-based distro, please make sure the only CFLAGS/CXXFLAGS used are -O1 (or -O0), -march, -pipe and -fomit-frame-pointer if necessary. -freorder-blocks and -malign-doubles should never be activated. Should get you some errors such as
ALSA sound/core/control.c:1105: unknown ioctl = 0xc2c85512 ALSA sound/core/control.c:1105: unknown ioctl = 0xc2c85512
Problem: kernel-22.214.171.124 with builtin alsa driver from version 1.0.11rc4 provokes a "No such device" message with the following hardware:
Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03) Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50)
Solution: As I was just upgrading the linux kernel from 2.6.10 to 126.96.36.199 I already had a working alsa setup. The kernel configuration of my whole sound subsystem was modular. Therefore neither a recompilation of the kernel nor a reboot was required. The only thing I had to do was:
Upgrading alsa-driver to alsa-driver-1.0.12rc3:
./configure --with-debug=full --with-cards=via82xx make -s make install
Now I removed all the old and faulty modules and replaced them by loading the new modules as usual. Then as usual:
With kernel-2.6.19 and 188.8.131.52 the hints given above do not help. The alsa-driver delivered with those kernels is simply not sufficient:
Cf. linux-184.108.40.206/include/sound/version.h #define CONFIG_SND_VERSION "1.0.13"
The whole driver has to be upgraded to alsa-driver-1.0.14rc1. For me this was the only way to avoid the error message "No such device".
The error message "hda-intel: no codecs found!" can be experienced, when the snd-hda-intel module fails to find the codec chip of your sound device. This may for example happen if your PCIe 1x sound card is in the wrong slot. For example on ASUS P5E mainboards, the supplied sound card is supposed to be inserted in the top most PCIe 1x slot. This is the brown slot on the P5E.
Retrieved from "http://alsa.opensrc.org/TroubleShooting"